Opertion air pressure:0.3Mpa-0.4Mpa Sand amount:1.5g/min-3.59g/min Blasting hole:? 0.5mm Rotate:Blasting head can rotate to 360° Feature 1. Easy to use, quick and light in appearance 2.
This product can link with global 4 or 6 hole teeth chair. Product use for:to increase viscosity of the touch surface, roughening the surface of compound material metal, porcelain crow, fiber post, inlay surface. Installation Plug your Kavo quick coupling directly to this unit, the installation is finished. Caution: You must check if there is remaining water in the handpiece cable before installation. If there is, you must dry it firstly, then install it. Recommended powder We recommend a particle size of 20 to 80? M high purity powder (99%+). It's easy for the powder to absorb moisture from the air, It would cause agglomeration, resulting in performance degradation. After install the powder, you should closed the cover of the bottle immediately to make sure its tight cover.The dry powder should flow freely, the wet powder does not flow easily or lumps. Extraoral application For surface cleaning and micro-roughening treatment before pasting metal/Porcelain Fiber post Inlay/Onlays maryland bridge Orthodontic bracket removing the cement in the original adhesive layer before second pasting Cast metal prosthesis defect detection Application in oral In the repair treatment, micro roughen surface of porcelain or composite. The sale of this item may be subject to regulation by the U.
Food and Drug Administration and state and local regulatory agencies. If any question about your order.