16L Dental Medical Surgical Vacuum Steam Sterilizer Autoclave With Printer 220V

  

Based on the new class B of international EN13060, have 3 pulsating vacuum. Vacuum up to -0.9Bar (-0.09Mpa). Suitable to sterilizing wrap, unwrap, solid, porous, hollow device. Use imported & advanced 16-bit microprocessor, easy to operate.

Most suitable for the Dept of Stomatology, Ophthalmology, Surgery and Lab. With BD test and vacuum test procedures. The jet type of steam generator, ensure the efficient sterilizing. With alarm system for waste water tank, avoid the waste water to enter into the sterilizing circulation, make the.

Precise digital display and advanced self-test system ensure you get the working data freely. Double lock door for safety during operating.

Optional inbuilt mini-printer or USB connector to record the process of sterilizing. Rated Voltage: 220V±22V, 50Hz±1Hz, 110V±11V, 60Hz±1Hz. : 0.9-1.3bar/120oC, 2.0-2.3bar/120oC (Both of above are Under Standard Atmospheric pressure).

Fuse-Melting pipe: T15A / T30A. Water Consumption volume per recycling round: 0.3L. The autoclave must be placed on the horizontal working base.

Must use the distilled water for the purpose of lasting the working life. There shall be no clog to the air cooling window on the outer surface. The object apparatus to be sterilized shall be placed on the device plate with enough clearance retained in favor of the air circulation inside the sterilizing room. Empty the water inside the cooling water collecting tank frequently. Usually, the cooling water collecting tank shall be emptied once the water storing tank emptied.

Must revolve the door handle to the teminal side while working. Don't open the door of autoclave when seeing the "0" displayed on the pressure indicator. Not be too closed to the door of the autoclave in case of scald when open the door. Shut off the power before discharging/installing the sealing ring, and the work shall be carried out after further sufficient cooling in case of scald. Don't drag or drop the autoclave during relocation period of the autoclave. The protecting ground shall be reliable. Equipment must be used away from teh magnetic field. Equipment life end, dealing with to local environmental protection laws and regulations.

The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies.

EUB (under 2KG): Only for USA, Canada, FranceUK and Australia. China Post (under 2 KG): 25-55 days. E-Packetunder 6kg: Only for UK, Canada, TaiWan, HongKong, Singapore, Brazil(without bettery), Japan, Korea, Spain and Australia. Few states need to pay remote surcharge. Don't worry, I will tell you before you pay if it's need.

Please make sure it's correct. Your SATISFACTION is our ultimate goal. We work hard to earn your trust and future business. A Please check the package first before you sign for the package. B If you have a defective item, you can return it or ask for a discount.

Or replace item for you. We are factory founded dental equipment Wholesaler and Retailer. If you have any questions about our service or products. You will be replied within 24 hours(48 hours in the weekend). The item "16L Dental Medical Surgical Vacuum Steam Sterilizer Autoclave With Printer 220V" is in sale since Thursday, August 25, 2016.

This item is in the category "Business, Office & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Autoclaves & Sterilisers".royal" and is located in ShenZhen. This item can be shipped to all countries in Europe, United States, Japan, Canada.

1. Brand: MT
2. MPN: MT-D-16L
3. Inside dimensions: 240mmX360mm
4. Outside dimensions(16L): 445*550*395mm
5. Net Weight: 45KG
6. Rated Voltage: 220V±22V, 50Hz±1Hz, 110V±11V, 60Hz±1Hz
7. Rated Power: 1800W
8. Sterilizing: 0.9-1.3bar/120oC, 2.0-2.3bar/120oC
9. Capacity: 16Liters
10. Fuse-Melting pipe: T15A / T30A
11. Working programs: 4
12. Operating Temp: 0-40 Degree
13. EAN: 0744750772052